19TAF/G (H0414)       order no. seas-H0414-08       on request
19,5 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 4000-20000 Hz
• resonance frequency fs = 1700 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• force factor BL = 2,6 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 4 cm²
• effective mechanical mass incl. air load mms = 0,23 g
• voice coil diameter = 19,5 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 66,5 mm
• overall diameter d = 93,8 mm
• mounting depth (not countersunk) t = 18 mm

PDF data sheet

19TAF/D/G (H0532)       order no. seas-H0532-08       EUR 43,70 excl. VAT: € 36.72 / $ 45.17
19,5 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 4000-20000 Hz
• resonance frequency fs = 1700 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• force factor BL = 2,6 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 4 cm²
• effective mechanical mass incl. air load mms = 0,23 g
• voice coil diameter = 19,5 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 66,5 mm
• overall diameter d = 93,8 mm
• mounting depth (not countersunk) t = 28 mm

PDF data sheet

19TAF/D (H0561)       order no. seas-H0561-08       on request
19,5 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 4000-20000 Hz
• resonance frequency fs = 1700 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• force factor BL = 2,6 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 4 cm²
• effective mechanical mass incl. air load mms = 0,23 g
• voice coil diameter = 19,5 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 66,5 mm
• overall diameter d = 93,8 mm
• mounting depth (not countersunk) t = 18 mm

PDF data sheet

19TFF1 (H0737)       order no. seas-H0737-08       EUR 34,60 excl. VAT: € 29.08 / $ 35.76
19,5 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 4000-20000 Hz
• resonance frequency fs = 1700 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• force factor BL = 2,6 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 4 cm²
• effective mechanical mass incl. air load mms = 0,23 g
• voice coil diameter = 19,5 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 66,5 mm
• overall diameter d = 93,8 mm
• mounting depth (not countersunk) t = 18 mm

PDF data sheet

open a bigger photo

22TAF/G (H1283)       order no. seas-H1283-06       EUR 44,30 excl. VAT: € 37.23 / $ 45.79
19,5 mm tweeter with high quality cone.

• power handling (continuous/programme) = 80/180 W
• frequency range = 2500-30000 Hz
• resonance frequency fs = 1100 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,9 Ohm
• force factor BL = 3,3 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 5,9 cm²
• effective mechanical mass incl. air load mms = 0,23 g
• voice coil diameter = 19,5 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 97,7 mm
• mounting depth (not countersunk) t = 24 mm

PDF data sheet

open a bigger photo

22TFF (1280)       order no. seas-H1280       EUR 39,10 excl. VAT: € 32.86 / $ 40.41
19,5 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/180 W
• frequency range = 2500-20000 Hz
• resonance frequency fs = 1050 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 4,9 Ohm
• force factor BL = 3,3 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 5,9 cm²
• effective mechanical mass incl. air load mms = 0,25 g
• voice coil diameter = 19,5 mm
• maximum peak linear excursion vibration x_lin = +/- 0,2 mm
• mounting diameter d = 85 mm
• overall diameter d = 97,7 mm
• mounting depth (not countersunk) t = 24 mm

PDF data sheet

open a bigger photo

SEAS TWS 27/6 (Ersatz für Audaphon TWS 25/6)       order no. seas-tws27-6       EUR 50,00 excl. VAT: € 42.02 / $ 51.68
26 mm dome tweeter with fabric dome.

• power handling (continuous/programme) = 90(ab2,5kHz) W
• frequency range = 600-24000 Hz
• resonance frequency fs = 900 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,8 N/A
• voice coil inductance L = 0,048 mH
• effective piston radiating area Sd = 7,7 cm²
• effective mechanical mass incl. air load mms = 0,28 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 75 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 24 mm

PDF data sheet

25TAFN/QG (H0623)       order no. seas-H0623-06       - not available
19,5 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 4000-20000 Hz
• resonance frequency fs = 1700 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• force factor BL = 2,6 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 4 cm²
• effective mechanical mass incl. air load mms = 0,23 g
• voice coil diameter = 19,5 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 46 mm
• overall diameter d = 60,5 mm
• mounting depth (not countersunk) t = 18,5 mm

PDF data sheet

25TFFN/QG (H02625)       order no. seas-H0625-06       on request
26 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 90/220 W
• frequency range = 3000-25000 Hz
• resonance frequency fs = 1800 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 89 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 2,45 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 46 mm
• overall diameter d = 60,5 mm
• mounting depth (not countersunk) t = 18,5 mm

PDF data sheet

26TFF (H1508)       order no. seas-H1508-06       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 1000 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91,5 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 97,7 mm
• mounting depth (not countersunk) t = 24 mm

PDF data sheet

27TFF (H0831)       order no. seas-H0831-06       EUR 41,10 excl. VAT: € 34.54 / $ 42.48
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 1200 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 24 mm

PDF data sheet

27TFFC (H0881)       order no. seas-H0881-06       EUR 48,10 excl. VAT: € 40.42 / $ 49.72
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 80/200 W
• frequency range = 2000-30000 Hz
• resonance frequency fs = 550 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,6 cm²
• effective mechanical mass incl. air load mms = 0,25 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 39 mm

PDF data sheet

open a bigger photo

27TAFC/G (H0883)       order no. seas-H0883-06       EUR 53,00 excl. VAT: € 44.54 / $ 54.78
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 500 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,6 cm²
• effective mechanical mass incl. air load mms = 0,32 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 39 mm

PDF data sheet

open a bigger photo

27TF1 (H1025)       order no. seas-H1025-06       EUR 44,50 excl. VAT: € 37.39 / $ 46.00
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 60/150 W
• frequency range = 1800-22000 Hz
• resonance frequency fs = 900 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,8 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,6 cm²
• effective mechanical mass incl. air load mms = 0,29 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 75 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 24 mm

27TFD (H1096)       order no. seas-H1096-06       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 60/150 W
• frequency range = 1600-22000 Hz
• resonance frequency fs = 650 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 4,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,6 cm²
• effective mechanical mass incl. air load mms = 0,29 g
• voice coil diameter = 26 mm
• mounting diameter d = 75 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 42 mm

open a bigger photo

27TBC/G (H1147)       order no. seas-H1147-06       EUR 52,20 excl. VAT: € 43.87 / $ 53.95
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 55/150 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 600 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,33 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 39 mm

PDF data sheet

27TBC/GTV (H1148)       order no. seas-H1148-06       EUR 47,00 excl. VAT: € 39.50 / $ 48.58
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 55/150 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 900 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 2,8 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,33 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 28,5 mm
• mass m = ss kg

PDF data sheet

open a bigger photo

27TDC (H1149)       order no. seas-H1149-06       EUR 49,60 excl. VAT: € 41.68 / $ 51.27
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 55/150 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 550 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 39 mm

PDF data sheet

27TDC/TV (H1150)       order no. seas-H1150-06       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 55/150 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 800 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 89,5 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 2,8 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 28,5 mm
• mass m = ss kg

PDF data sheet

27TDFC (H1189)       order no. seas-H1189-06       EUR 50,20 excl. VAT: € 42.18 / $ 51.89
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 1500-25000 Hz
• resonance frequency fs = 550 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,37 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 39 mm

PDF data sheet

27DFC/TV (H1210)       order no. seas-H1210-06       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 800 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 89,5 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 2,8 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,37 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,5 mm
• mounting depth (not countersunk) t = 28,5 mm
• mass m = ss kg

PDF data sheet

27TDF (H1211)       order no. seas-H1211-06       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2500-25000 Hz
• resonance frequency fs = 900 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,4 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,37 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 24 mm

PDF data sheet

27TBFC/G (H1212)       order no. seas-H1212-06       EUR 52,80 excl. VAT: € 44.37 / $ 54.57
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 1500-20000 Hz
• resonance frequency fs = 550 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91,5 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,34 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 39 mm

PDF data sheet

27TBFC/GTV (H1213)       order no. seas-H1213-06       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2000-20000 Hz
• resonance frequency fs = 750 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 90,5 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 2,8 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,34 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 28,5 mm
• mass m = ss kg

PDF data sheet

27TBFG/G (H1214)       order no. seas-H1214-06       EUR 36,00 excl. VAT: € 30.25 / $ 37.21
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2500-20000 Hz
• resonance frequency fs = 1100 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,34 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 24 mm

PDF data sheet

27TAFNC/D (H1397)       order no. seas-H1397-04       EUR 43,70 excl. VAT: € 36.72 / $ 45.17
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2500-30000 Hz
• resonance frequency fs = 1170 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 2,7 Ohm
• force factor BL = 1,9 N/A
• voice coil inductance L = 0,03 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,45 mm
• mounting diameter d = 46 mm
• overall diameter d = 53 mm
• mounting depth (not countersunk) t = 21,5 mm

PDF data sheet

27TFFNC/CG (H1406)       order no. seas-H1406-04       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 80/200 W
• frequency range = 2500-30000 Hz
• resonance frequency fs = 1170 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 2,7 Ohm
• force factor BL = 1,9 N/A
• voice coil inductance L = 0,03 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,26 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,45 mm
• mounting diameter d = 46 mm
• overall diameter d = 69,7 mm
• mounting depth (not countersunk) t = 21,5 mm

PDF data sheet

27TTFNC/GW (H1461)       order no. seas-H1461-06       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 100/230 W
• frequency range = 2500-25000 Hz
• resonance frequency fs = 750 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91,5 dB (2,83V; 1m)
• DC resistance Re = 4,9 Ohm
• force factor BL = 3,9 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,32 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 97,8 mm
• mounting depth (not countersunk) t = 30,5 mm

PDF data sheet

open a bigger photo

27TFFNC/G (H1396-04)       order no. seas-H1396-04       EUR 42,70 excl. VAT: € 35.88 / $ 44.14
26 mm tweeter with high quality cone. The magnet system is based on Neodymium technology.

• power handling (continuous/programme) = 100/200 W
• frequency range = 2500-30000 Hz
• resonance frequency fs = 1170 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 2,7 Ohm
• force factor BL = 1,9 N/A
• voice coil inductance L = 0,03 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,26 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,45 mm
• mounting diameter d = 46 mm
• overall diameter d = 53 mm
• mounting depth (not countersunk) t = 22 mm
• mass m = 0,10 kg

PDF data sheet

27TDFNC/GW (H1462)       order no. seas-H1462-06       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2500-30000 Hz
• resonance frequency fs = 750 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 90,5 dB (2,83V; 1m)
• DC resistance Re = 4,9 Ohm
• force factor BL = 3,9 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,31 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 97,8 mm
• mounting depth (not countersunk) t = 30,5 mm

PDF data sheet

27TBCD/GB-DXT (H1499)       order no. seas-H1499-06       EUR 75,40 excl. VAT: € 63.36 / $ 77.93
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 55/150 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 900 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,7 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,33 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,5 mm
• mounting depth (not countersunk) t = 59,3 mm

PDF data sheet

29TFF/W (H1318)       order no. seas-H1318-06       EUR 55,60 excl. VAT: € 46.72 / $ 57.47
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/200 W
• frequency range = 2200-25000 Hz
• resonance frequency fs = 950 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,7 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 8 cm²
• effective mechanical mass incl. air load mms = 0,35 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 24,5 mm

PDF data sheet

29TAF/W (H1322)       order no. seas-H1322-06       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 100/220 W
• frequency range = 2200-25000 Hz
• resonance frequency fs = 950 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91,5 dB (2,83V; 1m)
• DC resistance Re = 4,7 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 8 cm²
• effective mechanical mass incl. air load mms = 0,39 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 24,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 5,2 L volume
from 79/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,3 L volume bass reflex cabinet
with HP50 reflex tube, 22 cm long.
from 47/35 Hz (-3dB/-8dB).

T18RE/XFCTV2 (H1333)       order no. seas-H1333-08-06       EUR 143,00 excl. VAT: € 120.17 / $ 147.81
16 cm coax driver with high quality cone. The driver is magnetically shielded.

• power handling (continuous/programme) = 80/250 W
• frequency range = 30-25000 Hz
• resonance frequency fs = 26 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• force factor BL = 6,8 N/A
• voice coil inductance L = 0,79 mH
• effective piston radiating area Sd = 120 cm²
• effective mechanical mass incl. air load mms = 13,7 g
• equivalent volume of compliance Vas = 52 l
• total Q factor Qts = 0,26 (Qms=1,63, Qes=0,31)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 100,5 mm

PDF data sheet

Technische Daten Tweeter (H1333)       order no. not-available      
26 mm tweeter with high quality cone. The driver is magnetically shielded.

• power handling (continuous/programme) = 90/220 W
• resonance frequency fs = 1200 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 88,5 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 2,3 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 0,45 L volume
from 142/89 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1,3 L volume bass reflex cabinet
with HP35 reflex tube, 35 cm long.
from 77/60 Hz (-3dB/-8dB).

L12RE/XFC (H1602)       order no. seas-H1602-04       EUR 175,10 excl. VAT: € 147.14 / $ 180.99
11 cm coax driver with high quality cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 60-25000 Hz
• resonance frequency fs = 55 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 86 dB (2,83V; 1m)
• DC resistance Re = 3,1 Ohm
• force factor BL = 5,5 N/A
• voice coil inductance L = 0,48 mH
• effective piston radiating area Sd = 47 cm²
• effective mechanical mass incl. air load mms = 9,2 g
• equivalent volume of compliance Vas = 3 l
• total Q factor Qts = 0,3 (Qms=2,99, Qes=0,33)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 95,8 mm
• overall diameter d = 120 mm
• mounting depth (not countersunk) t = 69 mm

PDF data sheet

Technische Daten Tweeter (H1602)       order no. not-available      
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• resonance frequency fs = 1200 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 88,5 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm

PDF data sheet

open a bigger photo

MR18REX/XF (H1699-08/06)       order no. seas-H1699-08-06       EUR 204,10 excl. VAT: € 171.51 / $ 210.96
16 cm coax driver with high quality cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 200-22000 Hz
• resonance frequency fs = 126 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• force factor BL = 8,3 N/A
• voice coil inductance L = 0,16 mH
• effective piston radiating area Sd = 126 cm²
• effective mechanical mass incl. air load mms = 11,8 g
• equivalent volume of compliance Vas = 3 l
• total Q factor Qts = 0,69 (Qms=2,49, Qes=0,96)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 78 mm

PDF data sheet

Technische Daten Tweeter (H1699-08/06)       order no. not-available      
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90-220 W
• impedance R = 6 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 5 Ohm
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm

PDF data sheet

open a bigger photo

FU10RB-04 (H1600-04)       order no. seas-H1600-04       EUR 54,00 excl. VAT: € 45.38 / $ 55.82
9 cm full range driver with high quality cone.

• power handling (continuous/programme) = 40/100 W
• frequency range = 100-20000 Hz
• resonance frequency fs = 102 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 85 dB (2,83V; 1m)
• DC resistance Re = 3,3 Ohm
• force factor BL = 2,72 N/A
• voice coil inductance L = 0,29 mH
• effective piston radiating area Sd = 38,5 cm²
• effective mechanical mass incl. air load mms = 4,5 g
• equivalent volume of compliance Vas = 1 l
• total Q factor Qts = 0,91 (Qms=3,15, Qes=1,28)
• voice coil diameter = 19 mm
• maximum peak linear excursion vibration x_lin = +/- 2 mm
• mounting diameter d = 80 mm
• overall diameter d = 98 mm
• mounting depth (not countersunk) t = 43,6 mm

PDF data sheet

open a bigger photo

FU10RB-08 (H1600-08)       order no. seas-H1600-08       EUR 54,00 excl. VAT: € 45.38 / $ 55.82
9 cm full range driver with high quality cone.

• power handling (continuous/programme) = 40/100 W
• frequency range = 100-20000 Hz
• resonance frequency fs = 102 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 82,1 dB (2,83V; 1m)
• DC resistance Re = 6,42 Ohm
• force factor BL = 3,56 N/A
• voice coil inductance L = 0,16 mH
• effective piston radiating area Sd = 38,5 cm²
• effective mechanical mass incl. air load mms = 4,05 g
• equivalent volume of compliance Vas = 1 l
• total Q factor Qts = 0,96 (Qms=3,25, Qes=1,36)
• voice coil diameter = 19 mm
• maximum peak linear excursion vibration x_lin = +/- 2 mm
• mounting diameter d = 80 mm
• overall diameter d = 98 mm
• mounting depth (not countersunk) t = 43,6 mm

PDF data sheet

open a bigger photo

MU10RB-SL (H1658-04)       order no. seas-H1658-04       EUR 49,00 excl. VAT: € 41.18 / $ 50.65
9 cm midrange driver with high quality cone.

• power handling (continuous/programme) = 40/100 W
• frequency range = 100-20000 Hz
• resonance frequency fs = 100 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 84,7 dB (2,83V; 1m)
• DC resistance Re = 3,3 Ohm
• force factor BL = 2,9 N/A
• voice coil inductance L = 0,14 mH
• effective piston radiating area Sd = 38,5 cm²
• effective mechanical mass incl. air load mms = 4,51 g
• equivalent volume of compliance Vas = 1,1 l
• total Q factor Qts = 0,67 (Qms=1,63, Qes=1,15)
• voice coil diameter = 19 mm
• maximum peak linear excursion vibration x_lin = +/- 2 mm
• mounting diameter d = 80 mm
• overall diameter d = 98 mm
• mounting depth (not countersunk) t = 43,6 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 4,1 L volume
from 97/61 Hz (-3dB/-8dB)
 
recommended cabinet 2:
16 L volume bass reflex cabinet
with HP50 reflex tube, 10 cm long.
from 43/38 Hz (-3dB/-8dB).

MCA12RC (H1304)       order no. seas-H1304-08       EUR 73,50 excl. VAT: € 61.76 / $ 75.97
11 cm midrange driver with high quality cone.

• frequency range = 400-5000 Hz
• resonance frequency fs = 68 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86 dB (2,83V; 1m)
• DC resistance Re = 6,3 Ohm
• force factor BL = 4,2 N/A
• voice coil inductance L = 0,31 mH
• effective piston radiating area Sd = 55 cm²
• effective mechanical mass incl. air load mms = 4,58 g
• equivalent volume of compliance Vas = 5 l
• total Q factor Qts = 0,57 (Qms=2,42, Qes=0,74)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,9 mm
• mounting diameter d = 95,8 mm
• overall diameter d = 120,4 mm
• mounting depth (not countersunk) t = 55,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 1,1 L volume
from 162/102 Hz (-3dB/-8dB)
 
recommended cabinet 2:
2,7 L volume bass reflex cabinet
with HP35 reflex tube, 12 cm long.
from 96/72 Hz (-3dB/-8dB).

MCA15RCY (H1262)       order no. seas-H1262-08       EUR 87,60 excl. VAT: € 73.61 / $ 90.54
13 cm midrange driver with high quality cone.

• frequency range = 100-4000 Hz
• resonance frequency fs = 51 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89,5 dB (2,83V; 1m)
• DC resistance Re = 5,8 Ohm
• force factor BL = 6,8 N/A
• voice coil inductance L = 0,73 mH
• effective piston radiating area Sd = 80 cm²
• effective mechanical mass incl. air load mms = 7,1 g
• equivalent volume of compliance Vas = 12 l
• total Q factor Qts = 0,25 (Qms=1,57, Qes=0,3)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 1,7 mm
• mounting diameter d = 112 mm
• overall diameter d = 146 mm
• mounting depth (not countersunk) t = 67,5 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 0,74 L volume
from 147/93 Hz (-3dB/-8dB)
 
recommended cabinet 2:
2,2 L volume bass reflex cabinet
with HP35 reflex tube, 19 cm long.
from 80/62 Hz (-3dB/-8dB).

CA12RCY (H1152)       order no. seas-H1152-08       EUR 69,80 excl. VAT: € 58.66 / $ 72.15
11 cm bass driver with paper cone.

• power handling (continuous/programme) = 60/200 W
• frequency range = 45-5000 Hz
• resonance frequency fs = 57 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86 dB (2,83V; 1m)
• DC resistance Re = 6,4 Ohm
• force factor BL = 6,35 N/A
• voice coil inductance L = 1,05 mH
• effective piston radiating area Sd = 55 cm²
• effective mechanical mass incl. air load mms = 6,1 g
• equivalent volume of compliance Vas = 5 l
• total Q factor Qts = 0,31 (Qms=2,17, Qes=0,36)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 95,8 mm
• overall diameter d = 120,4 mm
• mounting depth (not countersunk) t = 58,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 0,64 L volume
from 137/87 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1,8 L volume bass reflex cabinet
with HP35 reflex tube, 28 cm long.
from 77/59 Hz (-3dB/-8dB).

L12RCY/P (H1207)       order no. seas-H1207-08       EUR 74,60 excl. VAT: € 62.69 / $ 77.11
bass driver with aluminium cone.

• power handling (continuous/programme) = 70/200 W
• frequency range = 55-3500 Hz
• resonance frequency fs = 50 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 85,5 dB (2,83V; 1m)
• DC resistance Re = 5,5 Ohm
• force factor BL = 6,1 N/A
• voice coil inductance L = 0,76 mH
• effective piston radiating area Sd = 50 cm²
• effective mechanical mass incl. air load mms = 6,8 g
• equivalent volume of compliance Vas = 5 l
• total Q factor Qts = 0,29 (Qms=2,34, Qes=0,33)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 95.6 mm
• overall diameter d = 120,4 mm
• mounting depth (not countersunk) t = 58,5 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 2,4 L volume
from 110/69 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,5 L volume bass reflex cabinet
with HP35 reflex tube, 9 cm long.
from 59/46 Hz (-3dB/-8dB).

ER15RLY (H1455)       order no. seas-H1455-08       EUR 78,70 excl. VAT: € 66.13 / $ 81.35
13 cm bass driver with paper cone.

• power handling (continuous/programme) = 60/250 W
• frequency range = 50-4000 Hz
• resonance frequency fs = 44 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87,5 dB (2,83V; 1m)
• DC resistance Re = 5,6 Ohm
• force factor BL = 5,5 N/A
• voice coil inductance L = 0,73 mH
• effective piston radiating area Sd = 80 cm²
• effective mechanical mass incl. air load mms = 7,6 g
• equivalent volume of compliance Vas = 15 l
• total Q factor Qts = 0,32 (Qms=1,55, Qes=0,41)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 5 mm
• mounting diameter d = 112 mm
• overall diameter d = 146 mm
• mounting depth (not countersunk) t = 67,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 2,5 L volume
from 98/62 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,8 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 51/40 Hz (-3dB/-8dB).

L15RLY/P (H1141)       order no. seas-H1141-08       EUR 87,20 excl. VAT: € 73.28 / $ 90.13
13 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 80/200 W
• frequency range = 45-3000 Hz
• resonance frequency fs = 44 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86 dB (2,83V; 1m)
• DC resistance Re = 5,5 Ohm
• force factor BL = 5,7 N/A
• voice coil inductance L = 0,84 mH
• effective piston radiating area Sd = 75 cm²
• effective mechanical mass incl. air load mms = 8,1 g
• equivalent volume of compliance Vas = 12 l
• total Q factor Qts = 0,36 (Qms=2,1, Qes=0,43)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 5 mm
• mounting diameter d = 112 mm
• overall diameter d = 146 mm
• mounting depth (not countersunk) t = 67,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 2,6 L volume
from 104/65 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,5 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 55/43 Hz (-3dB/-8dB).

CA15RLY (H1216)       order no. seas-H1216-08       EUR 87,90 excl. VAT: € 73.87 / $ 90.85
13 cm bass driver with paper cone.

• power handling (continuous/programme) = 60/250 W
• frequency range = 50-4000 Hz
• resonance frequency fs = 44 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87,5 dB (2,83V; 1m)
• DC resistance Re = 5,6 Ohm
• force factor BL = 5,5 N/A
• voice coil inductance L = 0,82 mH
• effective piston radiating area Sd = 80 cm²
• effective mechanical mass incl. air load mms = 7,7 g
• equivalent volume of compliance Vas = 14 l
• total Q factor Qts = 0,34 (Qms=1,88, Qes=0,42)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 5 mm
• mounting diameter d = 112 mm
• overall diameter d = 146 mm
• mounting depth (not countersunk) t = 67,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 2,9 L volume
from 87/55 Hz (-3dB/-8dB)
 
recommended cabinet 2:
9,7 L volume bass reflex cabinet
with HP35 reflex tube, 11 cm long.
from 46/36 Hz (-3dB/-8dB).

L16RNX (H1488-04)       order no. seas-H1488-04       EUR 111,30 excl. VAT: € 93.53 / $ 115.04
13 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 45-2000 Hz
• resonance frequency fs = 37 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 3,1 Ohm
• force factor BL = 5,4 N/A
• voice coil inductance L = 0,32 mH
• effective piston radiating area Sd = 104 cm²
• effective mechanical mass incl. air load mms = 14,7 g
• equivalent volume of compliance Vas = 16 l
• total Q factor Qts = 0,33 (Qms=2,31, Qes=0,38)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 126 mm
• overall diameter d = 146 mm
• mounting depth (not countersunk) t = 70,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 3,4 L volume
from 87/55 Hz (-3dB/-8dB)
 
recommended cabinet 2:
11,7 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 45/35 Hz (-3dB/-8dB).

L16RNX (H1488-08)       order no. seas-H1488-08       EUR 111,30 excl. VAT: € 93.53 / $ 115.04
13 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 45-2000 Hz
• resonance frequency fs = 39 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 85 dB (2,83V; 1m)
• DC resistance Re = 5,8 Ohm
• force factor BL = 7,2 N/A
• voice coil inductance L = 0,48 mH
• effective piston radiating area Sd = 104 cm²
• effective mechanical mass incl. air load mms = 15,3 g
• equivalent volume of compliance Vas = 16 l
• total Q factor Qts = 0,36 (Qms=2,08, Qes=0,44)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 126 mm
• overall diameter d = 146 mm
• mounting depth (not countersunk) t = 70,5 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 7,2 L volume
from 66/42 Hz (-3dB/-8dB)
 
recommended cabinet 2:
29 L volume bass reflex cabinet
with HP50 reflex tube, 13 cm long.
from 32/26 Hz (-3dB/-8dB).

L16RN/SL (H1480)       order no. seas-H1480-08       EUR 102,50 excl. VAT: € 86.13 / $ 105.95
13 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 45-2000 Hz
• resonance frequency fs = 37 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 84 dB (2,83V; 1m)
• DC resistance Re = 6 Ohm
• force factor BL = 6,1 N/A
• voice coil inductance L = 0,64 mH
• effective piston radiating area Sd = 104 cm²
• effective mechanical mass incl. air load mms = 14,7 g
• equivalent volume of compliance Vas = 19 l
• total Q factor Qts = 0,45 (Qms=2,48, Qes=0,55)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 126 mm
• overall diameter d = 146 mm
• mounting depth (not countersunk) t = 65,5 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 4 L volume
from 90/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
12,5 L volume bass reflex cabinet
with HP50 reflex tube, 17 cm long.
from 48/38 Hz (-3dB/-8dB).

U16RCY/P (H1520)       order no. seas-H1520-08       EUR 97,60 excl. VAT: € 82.02 / $ 100.88
13 cm bass driver with paper cone.

• power handling (continuous/programme) = 60/250 W
• frequency range = 45-3000 Hz
• resonance frequency fs = 36 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• force factor BL = 6,3 N/A
• voice coil inductance L = 0,81 mH
• effective piston radiating area Sd = 99 cm²
• effective mechanical mass incl. air load mms = 10,26 g
• equivalent volume of compliance Vas = 25 l
• total Q factor Qts = 0,32 (Qms=2,19, Qes=0,38)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 4 mm
• mounting diameter d = 126 mm
• overall diameter d = 146 mm
• mounting depth (not countersunk) t = 65,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 5,6 L volume
from 85/54 Hz (-3dB/-8dB)
 
recommended cabinet 2:
17 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 46/36 Hz (-3dB/-8dB).

L18RDY/P (H1085)       order no. seas-H1085-08       EUR 89,40 excl. VAT: € 75.13 / $ 92.41
16 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 35-2500 Hz
• resonance frequency fs = 33 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 5,6 Ohm
• force factor BL = 6,5 N/A
• voice coil inductance L = 0,92 mH
• effective piston radiating area Sd = 125 cm²
• effective mechanical mass incl. air load mms = 12,7 g
• equivalent volume of compliance Vas = 38 l
• total Q factor Qts = 0,31 (Qms=2,01, Qes=0,37)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 4 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 73 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 5 L volume
from 93/59 Hz (-3dB/-8dB)
 
recommended cabinet 2:
18 L volume bass reflex cabinet
with HP70 reflex tube, 22 cm long.
from 48/38 Hz (-3dB/-8dB).

U18RNX/P (H1571)       order no. seas-H1571-08       EUR 118,00 excl. VAT: € 99.16 / $ 121.97
16 cm bass driver with high quality cone.

• power handling (continuous/programme) = 250 W
• frequency range = 30-4000 Hz
• resonance frequency fs = 43 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 5,9 Ohm
• force factor BL = 6,9 N/A
• voice coil inductance L = 0,25 mH
• effective piston radiating area Sd = 126 cm²
• effective mechanical mass incl. air load mms = 13,4 g
• equivalent volume of compliance Vas = 22 l
• total Q factor Qts = 0,37 (Qms=2,05, Qes=0,45)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 83,2 mm
• mass m = 1,9 kg

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 90/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,8 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 49/38 Hz (-3dB/-8dB).

CA18RNX (H1215)       order no. seas-H1215-08       EUR 90,40 excl. VAT: € 75.97 / $ 93.44
16 cm bass driver with paper cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 45-3000 Hz
• resonance frequency fs = 35 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,5 dB (2,83V; 1m)
• DC resistance Re = 5,8 Ohm
• force factor BL = 7,2 N/A
• voice coil inductance L = 1,2 mH
• effective piston radiating area Sd = 136 cm²
• effective mechanical mass incl. air load mms = 14 g
• equivalent volume of compliance Vas = 33 l
• total Q factor Qts = 0,31 (Qms=1,9, Qes=0,37)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 78 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 13,7 L volume
from 72/46 Hz (-3dB/-8dB)
 
recommended cabinet 2:
56 L volume bass reflex cabinet
with HP70 reflex tube, 9 cm long.
from 34/28 Hz (-3dB/-8dB).

CA18RLY (H1217)       order no. seas-H1217-08       EUR 82,50 excl. VAT: € 69.33 / $ 85.27
16 cm bass driver with paper cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 35-3000 Hz
• resonance frequency fs = 42 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 5,8 Ohm
• force factor BL = 5,6 N/A
• voice coil inductance L = 1,05 mH
• effective piston radiating area Sd = 136 cm²
• effective mechanical mass incl. air load mms = 10,6 g
• equivalent volume of compliance Vas = 32 l
• total Q factor Qts = 0,47 (Qms=2,92, Qes=0,56)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 5 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 73 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 4,5 L volume
from 93/58 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,5 L volume bass reflex cabinet
with HP50 reflex tube, 15 cm long.
from 51/39 Hz (-3dB/-8dB).

L18RNX/P (H1224)       order no. seas-H1224-08       EUR 95,50 excl. VAT: € 80.25 / $ 98.71
16 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 100/250 W
• frequency range = 40-2500 Hz
• resonance frequency fs = 36 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 5,8 Ohm
• force factor BL = 7,2 N/A
• voice coil inductance L = 1,06 mH
• effective piston radiating area Sd = 126 cm²
• effective mechanical mass incl. air load mms = 13,6 g
• equivalent volume of compliance Vas = 30 l
• total Q factor Qts = 0,31 (Qms=2,09, Qes=0,36)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 78 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 4,7 L volume
from 95/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,4 L volume bass reflex cabinet
with HP50 reflex tube, 13 cm long.
from 52/40 Hz (-3dB/-8dB).

ER18RNX (H1456)       order no. seas-H1456-08       EUR 96,70 excl. VAT: € 81.26 / $ 99.95
16 cm bass driver with paper cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 45-3000 Hz
• resonance frequency fs = 37 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,5 dB (2,83V; 1m)
• DC resistance Re = 5,9 Ohm
• force factor BL = 7,2 N/A
• voice coil inductance L = 0,67 mH
• effective piston radiating area Sd = 136 cm²
• effective mechanical mass incl. air load mms = 14 g
• equivalent volume of compliance Vas = 32 l
• total Q factor Qts = 0,31 (Qms=1,58, Qes=0,39)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 78 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 9,1 L volume
from 66/42 Hz (-3dB/-8dB)
 
recommended cabinet 2:
21 L volume bass reflex cabinet
with HP70 reflex tube, 40 cm long.
from 40/30 Hz (-3dB/-8dB).

CD22RN4X (H1192)       order no. seas-H1192-08       EUR 128,90 excl. VAT: € 108.32 / $ 133.23
20 cm bass driver with paper cone.

• power handling (continuous/programme) = 100/250 W
• frequency range = 20-2500 Hz
• resonance frequency fs = 20 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• force factor BL = 11,4 N/A
• voice coil inductance L = 3,47 mH
• effective piston radiating area Sd = 230 cm²
• effective mechanical mass incl. air load mms = 41,6 g
• equivalent volume of compliance Vas = 108 l
• total Q factor Qts = 0,24 (Qms=3,28, Qes=0,26)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 7 mm
• mounting diameter d = 186,4 mm
• overall diameter d = 220,6 mm
• mounting depth (not countersunk) t = 90 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 9,3 L volume
from 64/40 Hz (-3dB/-8dB)
 
recommended cabinet 2:
24 L volume bass reflex cabinet
with HP70 reflex tube, 38 cm long.
from 38/28 Hz (-3dB/-8dB).

L22RN4X/P (H1208)       order no. seas-H1208-08       EUR 113,20 excl. VAT: € 95.13 / $ 117.01
20 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 125/300 W
• frequency range = 20-1000 Hz
• resonance frequency fs = 21 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86,5 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• force factor BL = 10,7 N/A
• voice coil inductance L = 3,76 mH
• effective piston radiating area Sd = 220 cm²
• effective mechanical mass incl. air load mms = 40 g
• equivalent volume of compliance Vas = 93 l
• total Q factor Qts = 0,27 (Qms=3,13, Qes=0,29)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 7 mm
• mounting diameter d = 186,4 mm
• overall diameter d = 220,6 mm
• mounting depth (not countersunk) t = 90 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 18 L volume
from 57/36 Hz (-3dB/-8dB)
 
recommended cabinet 2:
56 L volume bass reflex cabinet
with HP70 reflex tube, 17 cm long.
from 31/24 Hz (-3dB/-8dB).

L22RNX/P (H1252)       order no. seas-H1252-08       EUR 106,40 excl. VAT: € 89.41 / $ 109.98
20 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 110/300 W
• frequency range = 25-2000 Hz
• resonance frequency fs = 23 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 6 Ohm
• force factor BL = 8,15 N/A
• voice coil inductance L = 1,43 mH
• effective piston radiating area Sd = 220 cm²
• effective mechanical mass incl. air load mms = 27 g
• equivalent volume of compliance Vas = 112 l
• total Q factor Qts = 0,32 (Qms=2,07, Qes=0,38)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 7 mm
• mounting diameter d = 186,4 mm
• overall diameter d = 220,6 mm
• mounting depth (not countersunk) t = 90 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 30 L volume
from 56/35 Hz (-3dB/-8dB)
 
recommended cabinet 2:
117 L volume bass reflex cabinet
with HP100 reflex tube, 17 cm long.
from 27/22 Hz (-3dB/-8dB).

CA22RNX (H1288)       order no. seas-H1288-08       EUR 102,40 excl. VAT: € 86.05 / $ 105.84
20 cm bass driver with paper cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 30-3000 Hz
• resonance frequency fs = 29 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89,5 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• force factor BL = 7 N/A
• voice coil inductance L = 1 mH
• effective piston radiating area Sd = 230 cm²
• effective mechanical mass incl. air load mms = 20,9 g
• equivalent volume of compliance Vas = 97 l
• total Q factor Qts = 0,41 (Qms=2,04, Qes=0,52)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 186,4 mm
• overall diameter d = 220,6 mm
• mounting depth (not countersunk) t = 90 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 11,3 L volume
from 90/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
33 L volume bass reflex cabinet
with HP100 reflex tube, 26 cm long.
from 50/38 Hz (-3dB/-8dB).

CA22RNY (H1471)       order no. seas-H1471-08       EUR 126,60 excl. VAT: € 106.39 / $ 130.86
20 cm bass driver with paper cone.

• power handling (continuous/programme) = 90/250 W
• frequency range = 35-2500 Hz
• resonance frequency fs = 34 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• force factor BL = 8,5 N/A
• voice coil inductance L = 1,55 mH
• effective piston radiating area Sd = 230 cm²
• effective mechanical mass incl. air load mms = 17,8 g
• equivalent volume of compliance Vas = 82 l
• total Q factor Qts = 0,3 (Qms=1,69, Qes=0,36)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 186,4 mm
• overall diameter d = 220,6 mm
• mounting depth (not countersunk) t = 97 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 12,2 L volume
from 82/52 Hz (-3dB/-8dB)
 
recommended cabinet 2:
33 L volume bass reflex cabinet
with HP70 reflex tube, 13 cm long.
from 47/36 Hz (-3dB/-8dB).

U22REX/P-SL (H1659-08)       order no. seas-H1659-08       EUR 152,90 excl. VAT: € 128.49 / $ 158.04
20 cm bass driver with high quality cone.

• power handling (continuous/programme) = 100/250 W
• frequency range = 29-4000 Hz
• resonance frequency fs = 29 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90,5 dB (2,83V; 1m)
• DC resistance Re = 6 Ohm
• force factor BL = 8 N/A
• voice coil inductance L = 0,7 mH
• effective piston radiating area Sd = 220 cm²
• effective mechanical mass incl. air load mms = 19,8 g
• equivalent volume of compliance Vas = 103 l
• total Q factor Qts = 0,29 (Qms=1,77, Qes=0,34)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 4 mm
• mounting diameter d = 186,4 mm
• overall diameter d = 220,6 mm
• mounting depth (not countersunk) t = 90 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 29 L volume
from 48/31 Hz (-3dB/-8dB)
 
recommended cabinet 2:
94 L volume bass reflex cabinet
with HP100 reflex tube, 33 cm long.
from 26/20 Hz (-3dB/-8dB).

L26RFX/P (H1209)       order no. seas-H1209-08       EUR 191,10 excl. VAT: € 160.59 / $ 197.52
25 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 125/300 W
• frequency range = 20-1000 Hz
• resonance frequency fs = 20 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 6,3 Ohm
• force factor BL = 10,7 N/A
• voice coil inductance L = 1,83 mH
• effective piston radiating area Sd = 330 cm²
• effective mechanical mass incl. air load mms = 53 g
• equivalent volume of compliance Vas = 171 l
• total Q factor Qts = 0,33 (Qms=2,15, Qes=0,39)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 7 mm
• mounting diameter d = 232,2 mm
• overall diameter d = 269 mm
• mounting depth (not countersunk) t = 107,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 24 L volume
from 68/43 Hz (-3dB/-8dB)
 
recommended cabinet 2:
78 L volume bass reflex cabinet
with HP100 reflex tube, 17 cm long.
from 36/28 Hz (-3dB/-8dB).

CA26RFX (H1305)       order no. seas-H1305-08       EUR 176,40 excl. VAT: € 148.24 / $ 182.33
25 cm bass driver with paper cone.

• power handling (continuous/programme) = 100/300 W
• frequency range = 30-1000 Hz
• resonance frequency fs = 29 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90,5 dB (2,83V; 1m)
• DC resistance Re = 6,3 Ohm
• force factor BL = 10,7 N/A
• voice coil inductance L = 1,95 mH
• effective piston radiating area Sd = 350 cm²
• effective mechanical mass incl. air load mms = 36,1 g
• equivalent volume of compliance Vas = 129 l
• total Q factor Qts = 0,34 (Qms=2,14, Qes=0,4)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 7 mm
• mounting diameter d = 232,2 mm
• overall diameter d = 269 mm
• mounting depth (not countersunk) t = 107,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 19 L volume
from 71/45 Hz (-3dB/-8dB)
 
recommended cabinet 2:
53 L volume bass reflex cabinet
with HP100 reflex tube, 27 cm long.
from 40/31 Hz (-3dB/-8dB).

CA26RE4X (H1316)       order no. seas-H1316-08       EUR 169,00 excl. VAT: € 142.02 / $ 174.68
25 cm bass driver with paper cone.

• power handling (continuous/programme) = 80/300 W
• frequency range = 30-1500 Hz
• resonance frequency fs = 25 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• force factor BL = 11,6 N/A
• voice coil inductance L = 3,08 mH
• effective piston radiating area Sd = 350 cm²
• effective mechanical mass incl. air load mms = 38,5 g
• equivalent volume of compliance Vas = 164 l
• total Q factor Qts = 0,28 (Qms=3,99, Qes=0,3)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 4 mm
• mounting diameter d = 232,2 mm
• overall diameter d = 269 mm
• mounting depth (not countersunk) t = 100,5 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 44 L volume
from 51/33 Hz (-3dB/-8dB)
 
recommended cabinet 2:
160 L volume bass reflex cabinet
with HP100 reflex tube, 14 cm long.
from 26/21 Hz (-3dB/-8dB).

A26RE4 (H1411-08)       order no. seas-H1411-08       EUR 159,80 excl. VAT: € 134.29 / $ 165.17
25 cm bass driver with paper cone.

• power handling (continuous/programme) = 80/300 W
• frequency range = 20-1500 Hz
• resonance frequency fs = 25 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 89 dB (2,83V; 1m)
• DC resistance Re = 6,3 Ohm
• force factor BL = 9,7 N/A
• voice coil inductance L = 3,8 mH
• effective piston radiating area Sd = 350 cm²
• effective mechanical mass incl. air load mms = 37,4 g
• equivalent volume of compliance Vas = 169 l
• total Q factor Qts = 0,39 (Qms=3,84, Qes=0,43)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 4 mm
• mounting diameter d = 232 mm
• overall diameter d = 269 mm
• mounting depth (not countersunk) t = 100,5 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 13,9 L volume
from 55/35 Hz (-3dB/-8dB)
 
recommended cabinet 2:
43 L volume bass reflex cabinet
with HP70 reflex tube, 26 cm long.
from 30/23 Hz (-3dB/-8dB).

L26ROY (D1001-04S)       order no. seas-D1001-04S       EUR 242,00 excl. VAT: € 203.36 / $ 250.13
25 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 250/500 W
• frequency range = 20-1000 Hz
• resonance frequency fs = 22 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 3,1 Ohm
• force factor BL = 12 N/A
• voice coil inductance L = 0,53 mH
• effective piston radiating area Sd = 363 cm²
• effective mechanical mass incl. air load mms = 107 g
• equivalent volume of compliance Vas = 87 l
• total Q factor Qts = 0,31 (Qms=4,14, Qes=0,33)
• voice coil diameter = 56 mm
• maximum peak linear excursion vibration x_lin = +/- 14 mm
• mounting diameter d = 237 mm
• overall diameter d = 269 mm
• mounting depth (not countersunk) t = 141 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 5 L volume
from 71/45 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,3 L volume bass reflex cabinet
with HP70 reflex tube, 57 cm long.
from 41/31 Hz (-3dB/-8dB).

L26RO4Y (D1004-04S)       order no. seas-D1004-04S       EUR 242,00 excl. VAT: € 203.36 / $ 250.13
25 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 250/500 W
• frequency range = 20-1000 Hz
• resonance frequency fs = 24 Hz
• impedance R = 4 Ohm
• sound pressure level SPL = 85,5 dB (2,83V; 1m)
• DC resistance Re = 3,3 Ohm
• force factor BL = 18 N/A
• voice coil inductance L = 3,85 mH
• effective piston radiating area Sd = 363 cm²
• effective mechanical mass incl. air load mms = 173 g
• equivalent volume of compliance Vas = 46 l
• total Q factor Qts = 0,26 (Qms=4,9, Qes=0,28)
• voice coil diameter = 56 mm
• maximum peak linear excursion vibration x_lin = +/- 14 mm
• mounting diameter d = 237 mm
• overall diameter d = 269 mm
• mounting depth (not countersunk) t = 141 mm

PDF data sheet

open a bigger photo

SL26R (D1003)       order no. seas-D1003       EUR 135,20 excl. VAT: € 113.61 / $ 139.74
25 cm passive radiator.

• resonance frequency fs = 16 Hz
• effective piston radiating area Sd = 363 cm²
• effective mechanical mass incl. air load mms = 260 g
• equivalent volume of compliance Vas = 93 l
• maximum peak linear excursion vibration x_lin = +/- 28 mm
• mounting diameter d = 237 mm
• overall diameter d = 269 mm
• mounting depth (not countersunk) t = 76 mm

PDF data sheet

SP18R (H9944)       order no. seas-H9944       EUR 69,50 excl. VAT: € 58.40 / $ 71.84
16 cm bass driver with high quality cone.

• resonance frequency fs = 26 Hz
• effective piston radiating area Sd = 130 cm²
• effective mechanical mass incl. air load mms = 21,5 g
• equivalent volume of compliance Vas = 41 l
• maximum peak linear excursion vibration x_lin = +/- 9,5 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 44 mm

PDF data sheet

SP22R (H9945)       order no. seas-H9945       EUR 69,40 excl. VAT: € 58.32 / $ 71.73
20 cm bass driver with high quality cone.

• resonance frequency fs = 22 Hz
• effective piston radiating area Sd = 230 cm²
• effective mechanical mass incl. air load mms = 28 g
• equivalent volume of compliance Vas = 138 l
• maximum peak linear excursion vibration x_lin = +/- 10 mm
• mounting diameter d = 186,4 mm
• overall diameter d = 220,6 mm
• mounting depth (not countersunk) t = 56 mm

PDF data sheet

SP26R (H9946)       order no. seas-H9946       EUR 117,80 excl. VAT: € 98.99 / $ 121.76
25 cm bass driver with high quality cone.

• resonance frequency fs = 22 Hz
• effective piston radiating area Sd = 350 cm²
• effective mechanical mass incl. air load mms = 42 g
• equivalent volume of compliance Vas = 214 l
• maximum peak linear excursion vibration x_lin = +/- 12,5 mm
• mounting diameter d = 232,2 mm
• overall diameter d = 269 mm
• mounting depth (not countersunk) t = 65,5 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 26 L volume
from 69/43 Hz (-3dB/-8dB)
 
recommended cabinet 2:
89 L volume bass reflex cabinet
with HP100 reflex tube, 14 cm long.
from 36/28 Hz (-3dB/-8dB).

FA22RCZ       order no. seas-H1597-08       EUR 142,70 excl. VAT: € 119.92 / $ 147.50
20 cm full range driver with paper cone.

• power handling (continuous/programme) = 40/110 W
• frequency range = 30-20000 Hz
• resonance frequency fs = 30 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 94 dB (2,83V; 1m)
• DC resistance Re = 5,7 Ohm
• force factor BL = 6,4 N/A
• voice coil inductance L = 0,09 mH
• effective piston radiating area Sd = 222 cm²
• effective mechanical mass incl. air load mms = 12,6 g
• equivalent volume of compliance Vas = 134 l
• total Q factor Qts = 0,35 (Qms=4,36, Qes=0,38)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 186 mm
• overall diameter d = 220 mm
• mounting depth (not countersunk) t = 85 mm

PDF data sheet

KT25 F (H457)       order no. I-6565       on request
26 mm tweeter with fabric cone.

• power handling (continuous/programme) = 120/160 W
• frequency range = 3000-25000 Hz
• resonance frequency fs = 1400 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• voice coil diameter = 26 mm
• mounting diameter d = 75 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 28 mm

KTN25 F (H615)       order no. I-6567       EUR 36,20 excl. VAT: € 30.42 / $ 37.42
26 mm tweeter with fabric cone.

• power handling (continuous/programme) = 120/160 W
• frequency range = 3000-25000 Hz
• resonance frequency fs = 1800 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 89 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• voice coil diameter = 26 mm
• mounting diameter d = 46 mm
• overall diameter d = 48 mm
• mounting depth (not countersunk) t = 14 mm

KT26 F (H0519)       order no. I-6568       - not available
26 mm tweeter with fabric cone.

• power handling (continuous/programme) = 80/200 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 1100 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• voice coil diameter = 26 mm
• mounting diameter d = 75 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 42 mm

KT27 F (H831)       order no. I-6559       EUR 32,00 excl. VAT: € 26.89 / $ 33.08
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 1200 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,5 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 24 mm

PDF data sheet

KT28 F (H881)       order no. I-6555       EUR 39,00 excl. VAT: € 32.77 / $ 40.31
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 80/200 W
• frequency range = 2000-30000 Hz
• resonance frequency fs = 550 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,6 cm²
• effective mechanical mass incl. air load mms = 0,25 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 39 mm

PDF data sheet

Noferro 12 (H1069)       order no. I-6737       - not available
19 mm tweeter with fabric cone.

• power handling (continuous/programme) = 40/60 W
• frequency range = 2500-22000 Hz
• resonance frequency fs = 1200 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• force factor BL = 2,8 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 4 cm²
• effective mechanical mass incl. air load mms = 0,17 g
• voice coil diameter = 19 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 67 mm
• overall diameter d = 94 mm
• mounting depth (not countersunk) t = 24 mm

open a bigger photo

Noferro 550 (H1149)       order no. I-1381008       EUR 41,00 excl. VAT: € 34.45 / $ 42.38
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 55/150 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 550 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 39 mm

PDF data sheet

open a bigger photo

Noferro 600G (H1147)       order no. I-1381006       EUR 41,00 excl. VAT: € 34.45 / $ 42.38
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 55/150 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 600 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,33 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 39 mm

PDF data sheet

Noferro 650 (H1096)       order no. I-6739       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 60/150 W
• frequency range = 1600-22000 Hz
• resonance frequency fs = 650 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 4,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,6 cm²
• effective mechanical mass incl. air load mms = 0,29 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 75 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 42 mm

Noferro 800/TV (H1150)       order no. I-1381009       on request
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 55/150 W
• frequency range = 200-25000 Hz
• resonance frequency fs = 800 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 89,5 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 2,8 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,3 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 28,5 mm
• mass m = ss kg

PDF data sheet

open a bigger photo

Noferro 900 (H1025)       order no. I-6724       EUR 44,50 excl. VAT: € 37.39 / $ 46.00
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 60/150 W
• frequency range = 1800-22000 Hz
• resonance frequency fs = 900 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 92 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,8 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,6 cm²
• effective mechanical mass incl. air load mms = 0,29 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 75 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 24 mm

Noferro 900 G/TV (H1148)       order no. I-1381007       EUR 45,00 excl. VAT: € 37.82 / $ 46.51
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 55/150 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 900 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 2,8 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7 cm²
• effective mechanical mass incl. air load mms = 0,33 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 28,5 mm
• mass m = ss kg

PDF data sheet

open a bigger photo

TAF 27plus (H883)       order no. I-6720       EUR 51,00 excl. VAT: € 42.86 / $ 52.71
26 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 500 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• force factor BL = 3,5 N/A
• voice coil inductance L = 0,05 mH
• effective piston radiating area Sd = 7,6 cm²
• effective mechanical mass incl. air load mms = 0,32 g
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 0,25 mm
• mounting diameter d = 85 mm
• overall diameter d = 103,8 mm
• mounting depth (not countersunk) t = 39 mm

PDF data sheet

K29 FD (H587)       order no. I-6562       - not available
26 mm tweeter with metal cone.

• power handling (continuous/programme) = 90/220 W
• frequency range = 2000-25000 Hz
• resonance frequency fs = 1400 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• effective piston radiating area Sd = 7 cm²
• voice coil diameter = 26 mm
• mounting diameter d = 75 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 28 mm

recommended cabinet 1:
closed cabinet with 0,64 L volume
from 137/87 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1,8 L volume bass reflex cabinet
with HP35 reflex tube, 28 cm long.
from 77/59 Hz (-3dB/-8dB).

W121 AL (H1207)       order no. I-1381012       - not available (_)
bass driver with aluminium cone.

• power handling (continuous/programme) = 70/200 W
• frequency range = 55-3500 Hz
• resonance frequency fs = 50 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 85,5 dB (2,83V; 1m)
• DC resistance Re = 5,5 Ohm
• force factor BL = 6,1 N/A
• voice coil inductance L = 0,76 mH
• effective piston radiating area Sd = 50 cm²
• effective mechanical mass incl. air load mms = 6,8 g
• equivalent volume of compliance Vas = 5 l
• total Q factor Qts = 0,29 (Qms=2,34, Qes=0,33)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 95.6 mm
• overall diameter d = 120,4 mm
• mounting depth (not countersunk) t = 58,5 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 9,3 L volume
from 64/40 Hz (-3dB/-8dB)
 
recommended cabinet 2:
24 L volume bass reflex cabinet
with HP70 reflex tube, 38 cm long.
from 38/28 Hz (-3dB/-8dB).

W221 AL (H1208)       order no. I-1381013       - not available (_)
20 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 125/300 W
• frequency range = 20-1000 Hz
• resonance frequency fs = 21 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86,5 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• force factor BL = 10,7 N/A
• voice coil inductance L = 3,76 mH
• effective piston radiating area Sd = 220 cm²
• effective mechanical mass incl. air load mms = 40 g
• equivalent volume of compliance Vas = 93 l
• total Q factor Qts = 0,27 (Qms=3,13, Qes=0,29)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 7 mm
• mounting diameter d = 186,4 mm
• overall diameter d = 220,6 mm
• mounting depth (not countersunk) t = 90 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 29 L volume
from 48/31 Hz (-3dB/-8dB)
 
recommended cabinet 2:
94 L volume bass reflex cabinet
with HP100 reflex tube, 33 cm long.
from 26/20 Hz (-3dB/-8dB).

W260 AL (H1209)       order no. I-1381010       - not available (_)
25 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 125/300 W
• frequency range = 20-1000 Hz
• resonance frequency fs = 20 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 6,3 Ohm
• force factor BL = 10,7 N/A
• voice coil inductance L = 1,83 mH
• effective piston radiating area Sd = 330 cm²
• effective mechanical mass incl. air load mms = 53 g
• equivalent volume of compliance Vas = 171 l
• total Q factor Qts = 0,33 (Qms=2,15, Qes=0,39)
• voice coil diameter = 51 mm
• maximum peak linear excursion vibration x_lin = +/- 7 mm
• mounting diameter d = 232,2 mm
• overall diameter d = 269 mm
• mounting depth (not countersunk) t = 107,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 2,6 L volume
from 104/65 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,5 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 55/43 Hz (-3dB/-8dB).

WA150 (H1216)       order no. I-1381015       - not available (_)
13 cm bass driver with paper cone.

• power handling (continuous/programme) = 60/250 W
• frequency range = 50-4000 Hz
• resonance frequency fs = 44 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87,5 dB (2,83V; 1m)
• DC resistance Re = 5,6 Ohm
• force factor BL = 5,5 N/A
• voice coil inductance L = 0,82 mH
• effective piston radiating area Sd = 80 cm²
• effective mechanical mass incl. air load mms = 7,7 g
• equivalent volume of compliance Vas = 14 l
• total Q factor Qts = 0,34 (Qms=1,88, Qes=0,42)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 5 mm
• mounting diameter d = 112 mm
• overall diameter d = 146 mm
• mounting depth (not countersunk) t = 67,5 mm

PDF data sheet

open a bigger photo

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 90/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,8 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 49/38 Hz (-3dB/-8dB).

WA180 (H1215)       order no. I-1381014       - not available (_)
16 cm bass driver with paper cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 45-3000 Hz
• resonance frequency fs = 35 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88,5 dB (2,83V; 1m)
• DC resistance Re = 5,8 Ohm
• force factor BL = 7,2 N/A
• voice coil inductance L = 1,2 mH
• effective piston radiating area Sd = 136 cm²
• effective mechanical mass incl. air load mms = 14 g
• equivalent volume of compliance Vas = 33 l
• total Q factor Qts = 0,31 (Qms=1,9, Qes=0,37)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 78 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 5,6 L volume
from 85/54 Hz (-3dB/-8dB)
 
recommended cabinet 2:
17 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 46/36 Hz (-3dB/-8dB).

WA180 NAL (H1085)       order no. I-1381016       - not available (_)
16 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 35-2500 Hz
• resonance frequency fs = 33 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 5,6 Ohm
• force factor BL = 6,5 N/A
• voice coil inductance L = 0,92 mH
• effective piston radiating area Sd = 125 cm²
• effective mechanical mass incl. air load mms = 12,7 g
• equivalent volume of compliance Vas = 38 l
• total Q factor Qts = 0,31 (Qms=2,01, Qes=0,37)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 4 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 73 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 2,5 L volume
from 98/62 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,8 L volume bass reflex cabinet
with HP35 reflex tube, 10 cm long.
from 51/40 Hz (-3dB/-8dB).

WA151 AL (H1141)       order no. I-1381004       - not available (_)
13 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 80/200 W
• frequency range = 45-3000 Hz
• resonance frequency fs = 44 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 86 dB (2,83V; 1m)
• DC resistance Re = 5,5 Ohm
• force factor BL = 5,7 N/A
• voice coil inductance L = 0,84 mH
• effective piston radiating area Sd = 75 cm²
• effective mechanical mass incl. air load mms = 8,1 g
• equivalent volume of compliance Vas = 12 l
• total Q factor Qts = 0,36 (Qms=2,1, Qes=0,43)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 5 mm
• mounting diameter d = 112 mm
• overall diameter d = 146 mm
• mounting depth (not countersunk) t = 67,5 mm

PDF data sheet

recommended cabinet 1:
closed cabinet with 4,5 L volume
from 93/58 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,5 L volume bass reflex cabinet
with HP50 reflex tube, 15 cm long.
from 51/39 Hz (-3dB/-8dB).

WA181 AL (H1224)       order no. I-1381005       - not available (_)
16 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 100/250 W
• frequency range = 40-2500 Hz
• resonance frequency fs = 36 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 88 dB (2,83V; 1m)
• DC resistance Re = 5,8 Ohm
• force factor BL = 7,2 N/A
• voice coil inductance L = 1,06 mH
• effective piston radiating area Sd = 126 cm²
• effective mechanical mass incl. air load mms = 13,6 g
• equivalent volume of compliance Vas = 30 l
• total Q factor Qts = 0,31 (Qms=2,09, Qes=0,36)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 6 mm
• mounting diameter d = 145,2 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 78 mm

PDF data sheet

K19 F       order no. not-available       - not available
19 mm tweeter with high quality cone.

• power handling (continuous/programme) = 90/120 W
• frequency range = 2000-20000 Hz
• resonance frequency fs = 1700 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 90 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• voice coil diameter = 19 mm
• mounting diameter d = 67 mm
• overall diameter d = 94 mm
• mounting depth (not countersunk) t = 24 mm

KT19 F       order no. not-available       - not available
19 mm tweeter with fabric cone.

• power handling (continuous/programme) = 90/120 W
• frequency range = 2000-20000 Hz
• resonance frequency fs = 1700 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 6,2 Ohm
• voice coil diameter = 19 mm
• mounting diameter d = 67 mm
• overall diameter d = 94 mm
• mounting depth (not countersunk) t = 24 mm

recommended cabinet 1:
closed cabinet with 2,1 L volume
from 100/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,3 L volume bass reflex cabinet
with HP35 reflex tube, 14 cm long.
from 55/42 Hz (-3dB/-8dB).

W14 AL       order no. not-available       - not available
12 cm bass driver with aluminium cone.

• power handling (continuous/programme) = 80/200 W
• frequency range = 45-3000 Hz
• resonance frequency fs = 39 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 85,5 dB (2,83V; 1m)
• DC resistance Re = 5,5 Ohm
• effective piston radiating area Sd = 75 cm²
• equivalent volume of compliance Vas = 14 l
• total Q factor Qts = 0,31 (Qms=1,8, Qes=0,38)
• voice coil diameter = 26 mm
• maximum peak linear excursion vibration x_lin = +/- 4 mm
• mounting diameter d = 113 mm
• overall diameter d = 133 mm
• mounting depth (not countersunk) t = 69 mm

recommended cabinet 1:
closed cabinet with 11,3 L volume
from 80/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
36 L volume bass reflex cabinet
with HP100 reflex tube, 31 cm long.
from 43/33 Hz (-3dB/-8dB).

WP211 D       order no. not-available       - not available
20 cm bass driver with polypropylene cone.

• power handling (continuous/programme) = 120/180 W
• frequency range = 35-2500 Hz
• resonance frequency fs = 33 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• effective piston radiating area Sd = 223 cm²
• equivalent volume of compliance Vas = 66 l
• total Q factor Qts = 0,33 (Qms=1,8, Qes=0,41)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 187 mm
• overall diameter d = 216 mm
• mounting depth (not countersunk) t = 80 mm

recommended cabinet 1:
closed cabinet with 3,7 L volume
from 101/64 Hz (-3dB/-8dB)
 
recommended cabinet 2:
10,9 L volume bass reflex cabinet
with HP50 reflex tube, 16 cm long.
from 56/43 Hz (-3dB/-8dB).

WP180XP coax (T18 RE coax)       order no. not-available       - not available
16 cm coax driver with high quality cone.

• power handling (continuous/programme) = 80/250 W
• frequency range = 40-25000 Hz
• resonance frequency fs = 38 Hz
• impedance R = 8 Ohm
• sound pressure level SPL = 87 dB (2,83V; 1m)
• DC resistance Re = 6,1 Ohm
• effective piston radiating area Sd = 120 cm²
• equivalent volume of compliance Vas = 27 l
• total Q factor Qts = 0,3 (Qms=1,11, Qes=0,41)
• voice coil diameter = 39 mm
• maximum peak linear excursion vibration x_lin = +/- 3 mm
• mounting diameter d = 145 mm
• overall diameter d = 176 mm
• mounting depth (not countersunk) t = 95 mm

K30 D       order no. not-available       - not available
26 mm tweeter with metal cone.

• power handling (continuous/programme) = 90/140 W
• frequency range = 1600-25000 Hz
• resonance frequency fs = 650 Hz
• impedance R = 6 Ohm
• sound pressure level SPL = 91 dB (2,83V; 1m)
• DC resistance Re = 4,8 Ohm
• effective piston radiating area Sd = 7 cm²
• voice coil diameter = 26 mm
• mounting diameter d = 75 mm
• overall diameter d = 104 mm
• mounting depth (not countersunk) t = 42 mm

open a bigger photo

P21REX/DD (H596)       order no. not-available       - not available
bass driver with high quality cone.