Monacor SP-50X

With the help of the chassis overview page you find more than 5000 loudspeaker chassis.

=> more loudspeakers of this brand.
 

Monacor SP-50X       order no. mo-100720       - not available
13,5 x 13,5 cm full range driver with paper cone. The ribber surround is invers.
  • power handling (continuous/programme) = 25/50 W
  • frequency range = 70-20000 Hz
  • resonance frequency fs = 65 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • force factor BL = 4,3 N/A
  • voice coil inductance L = 0,35 mH
  • effective piston radiating area Sd = 75 cm2
  • effective mechanical mass incl. air load mms = 4,5 g
  • equivalent volume of compliance Vas = 9 l
  • total Q factor Qts = 0,5 (Qms=1,95, Qes=0,68)
  • voice coil diameter = 25,5 mm
  • maximum peak linear excursion vibration xlin = +/- 2,5 mm
  • mounting diameter d = 115 mm
  • overall diameter d = 135x135 mm
  • mounting depth (not countersunk) t = 66 mm
  • mass m = 0,8 kg
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2015 Iris Strassacker; All rights reserved. - errors and omissions excepted